(click for high-res image)
|
|
Greddy's E-Manage is an inexpensive
programmable fuel management system that allows you to
properly tune your factory fuel system, without having
to change the entire factory ECU system to an expensive
stand-alone unit. The E-Manage system is a universal "piggy-back"
type unit, which taps into most factory ECU wiring and
it still utilizes the existing sensors. Basic functions
will allow the user to slightly alter factory injector
duty-cycle(± 20% at 5 preset RPM points), by intercepting
and altering airflow or MAP sensor signals. For VTEC cars
you can adjust the VTEC shift point.
Additional features that are
built into the system, but are only accessible though
the use of our PC-Windows based "e-Manage Support
Tool" communication software (Please see our Authorized
GReddy Support Dealers for more information) are a 16x16
Airflow Adjustmemt Map, Larger Main Injector correction
adjustment, Upgrade Air Flow Meter adjustment, Boost
Limiter Cut, Anti-engine Stall, VTEC-fuel adjustment,
Real-time Map Trace, Real-time Display, Real-time Communication,
and basic Data-logging.
With the use of our "Optional
Injector Harness" and the software, the unit has
the ability to control an additional 16x16 Injector
duty cycle Map and the Controls for adding up to 2 Addional
Sub-injectors. If the "Optional Ignition Harrness"
and the software is used the unit has the ability to
control a 16x16 Ignition Timing Map. All of the above
Maps can also be Map-traced in Real-time as well. If
the factory range of Map or Airflow meter is surpassed,
you can incorperate our "Optional GReddy Pressure
Sensor and Pressue Harness" to set larger scales
of ajustment.
All installation and tuning
should only be made by a trained techntion with proper
Air/Fuel Monitoring tools.
|
